How to Repair a Saab 93 Key Fob
There's a high possibility that the key fob of your Saab 9-3 has a defective electronic chip. The metal part of classic car keys was easy to duplicate, however, modern key fobs come with an immobilizer system that protects your vehicle.
To figure out why your key fob isn't working you can replace the battery on your key fob. This is a cheap and easy fix.
How do you program a Saab 93 key fob
Saab 93 key fobs allow you to control your car's doors as well as the engine. They also open the fuel door as well as activate a panic button. The Key Lab can also be programmed with the car's radio transmitter. To do this, put the key into the ignition and switch it to the ON position. Follow the Tech2 instructions until you have programmed the keys that you intend to use with the vehicle.
Saabs are usually sold with just one key, despite the fact that they were originally designed to have two keys. You can add a second key by replacing the transmitter (which includes the transponder) and programming it in using a handheld computer known as Tech-2 Tech-2 at your Saab dealer. You'll also need a new key that matches the old one to function. This is an expensive task however, it's less expensive than replacing your entire CIM system by locking cylinders. It's also cheaper if you lose your sole working key.
Saab Key fob replacement 93
Saab owners that have lost their keys should get an extra as soon as they can. The key fob, in contrast to the keys made of steel that were used in cars as recently as 20 years ago is an electronic device which communicates with the vehicle using a special microchip. This is what makes the car recognize the key fob and stop it from being copied. This can be done at an auto dealer, but the cost can be high. It is best to avoid this issue by getting an alternative Saab key from an online retailer.
It will protect your vehicle if you lose it. A spare key is more likely be discovered by a burglar than the stolen one. This is due to the fact that most thieves do not have the tools to copy these newer types of keys. They'd need a specific device to copy keys but that's not a guaranteed method of protecting your vehicle from theft.
Another benefit of having an extra key is that it can save you money when replacing the battery in your SAAB 9-3 remote key. The electronic units of the keyfob have batteries, and they will eventually fail. It is fairly easy, however you need to be cautious not to damage the electronic components inside the case. You can watch videos on Youtube to learn how to do this task, including those by Cyclone Cyd.
Saab 93 key fob battery
It's probably time to replace the battery on your key fob in case you've noticed delays in response. While there may be other reasons for the delay but a dead battery is the most likely cause. It's a low-cost and easy fix, so you shouldn't put off doing it.
To remove the backup key, you must first remove the fob. To accomplish this, press firmly on the Saab logo and pull on the key loop. Then, place an flathead screwdriver into the indentation on the key fob case. The screwdriver should be twisted to release the case. The plastic shouldn't be damaged if the driver is not used excessive force.
Once the case has been opened you will be able to see the electronics inside. The circuit board is joined by metal retaining clips. If these clips are rusty, or dirty, the fob will not function properly. You can clean them using ruby alcohol. It's important to remember that this is only a temporary fix. The clips will eventually wear out and will need to replaced.
Test the car door locks using the backup remote before you replace the battery. If it works correctly it's probably a problem related to your primary key fob. If the issue continues to persist after replacing the battery, it could be a problem with your vehicle.
Saab key fob case with 93 keys
If your key fob case is showing signs of wear it is a good idea to purchase a replacement. They are readily available online and can be fitted to your remote control. The only thing you'll require is a flathead screwdriver and some patience. Just insert the screwdriver in the slot in the middle of the case and slowly work it to split open. Make sure you don't damage the limiters holding the battery in place. After removal of the emergency key and badge, the new case can be placed in the existing electronics. It will not require reprogramming.
The most effective key fob covers come with an inner lining which blocks signals from being transmitted to the key fob. This is essential because the signals are the ones that allow your car to start. Certain cases have silver layers while others are made of copper to distort transmissions better.
Key fobs are a great way to protect your keys. It will aid in keeping the track of your key fob, and aid in finding it in the dark on the way to your vehicle. A key fob can safeguard your keys from theft and add fashion to your keychain.